Cars Simplified
Cars Simplified
  • 391
  • 8 063 528
Car Fuse Types Explained: From Glass Tubes to Micro3!
Automotive fuses have gone through many changes over the years, but generally with cost effectiveness and space in mind! This UA-cam video starts off with a history lesson, then gets into an unconventional opinion, then finishes off with some qualities to look out for in a fuse.
0:00 • Automotive Fuse Types
0:45 • Early Automotive Fuses
1:40 • 1970s & 1980s Fuses
2:21 • 1990s Fuses & Beyond
3:31 • Why Micro3 is a Great Design
4:05 • Issues With Fuse Service Quality
5:42 • Would You Like To Know More?
More videos on the topic of fuses:
ua-cam.com/video/KtRMPIxXP7o/v-deo.html
ua-cam.com/video/uG3Ctur72Ts/v-deo.html
Quick reference for fuse codes:
Maxi: APX
Regular: APR, ATC, ATO, ATS
Mini: APM, ATM
LP-Mini: APS, ATT, ATM-LP
Micro2: APT, ATR
Micro3: ATL
There are two readily-available brands out there if you want quality fuses, and they are competitors:
Littelfuse (Nasdaq: LFUS)
Bussmann (owned by Eaton, NYSE: ETN)
They both offer small and large assortment packs, as well as moderate amounts of a single fuse type/amperage combo. There are a lot of off-brand/no-brand options out there that are not only a pain to deal with when diagnosing electrical issues, but also could be dangerous. Don't take my word for it, check out this video: ua-cam.com/video/nELwmfAOz_I/v-deo.html
Fuse large assortment tray: amzn.to/4cvhFsd *
Fuse medium assortment box with tester: amzn.to/4c4l1Tb *
• carssimplified.com/
Check us out on Twitter, Instagram, Facebook, and more: carssimplified.com/social-media.php
www.patreon.com/cars
(Sometimes previews and exclusive content are shared on these platforms!)
Cars Simplified is a show dedicated to automotive education, including DIY repair, automotive news, auto industry changes, automotive technology, performance modifications, car parts breakdowns, and more, all explained in a friendly and easy to digest manner!
#CarsSimplified #CarsSimplifiedS11 #CarsSimplifiedElectrical #Fuses #Fuse #Automotive #AutomotiveElectrical #Cars #HowTo #HowItWorks
Disclaimer:
Due to factors beyond the control of Cars Simplified, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Cars Simplified assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any video. Due to factors beyond the control of Cars Simplified, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Cars Simplified.
* Cars Simplified earns from qualifying purchases via the Amazon Associate program.
Переглядів: 666

Відео

Strut Bar Explained: Pros & Cons + Value
Переглядів 79014 днів тому
It goes by many names... Strut Bar, Strut Tower Brace, Strut Brace, and more, but they're all a reinforcing component meant to stiffen up the vehicle where flex may occur. This video is going to explain the benefits and drawbacks of a strut tower bar, if it may be worth installing on your own car, and afterwards, you can see how it is installed in another video! There are definitely some things...
Travis Pastrana & Bucky Lasek • Wicked Big Meet 2024
Переглядів 72321 день тому
Travis Pastrana and Bucky Lasek taking turns ripping around Stafford Motor Speedway with no padding, no parachute, and nothing held back! Okay, well maybe that's an exaggeration, but it was certainly fun to watch! For yet another year, I made the mistake of recording far away with the heaviest lens you can get for a Sony full frame camera under $2,000. If the footage is a little shaky, it's bec...
Strut Tower Brace Installation (Subaru Crosstrek 2018-2022, Impreza 2017-2023)
Переглядів 1,5 тис.Місяць тому
This video will walk you through installing a front strut tower bar (also called a strut tower brace, strut bar, or strut brace) on your 2018 to 2022 Subaru Crosstrek or 2017-2023 Impreza and WRX. While the video shows how to install a Cusco branded brace, it also includes information about other brands, so you can either follow along or know what's available on the market. Remember to read you...
Add or Replace: 4Runner Daylight Sensor (5th Gen: 2014-2024)
Переглядів 5552 місяці тому
The fifth generation Toyota 4Runner is sometimes built with automatic headlights, and those models come equipped with a daylight sensor which also gives the dashboard gauges and screen the ability to switch between day and night mode based on light levels instead of changing based on if the headlights are on or off. On 4Runners without the automatic headlights (which is a surprisingly high numb...
Goodyear Assurance Maxlife: Maximum Life? Yes, But...
Переглядів 2,4 тис.2 місяці тому
Goodyear Assurance Maxlife tires are certainly a long-life tire if you are constantly driving on them, but other factors still take a toll on them. These tires are best suited to vehicles that will use them all year long, and driven many miles to take full advantage of the tread durability before they decay from age. If you experience snow where you live, you might only get good use out of thes...
Piston Return Springs Explained
Переглядів 1,2 тис.3 місяці тому
Piston return springs help keep your engine running smoothly by distributing the load that would otherwise be very stressful explosions in the combustion chambers. This balance reduces wear on the engine and keeps the rest of the car from experiencing shaking, too. For more April Fool's Day content, be sure to check out these videos: ua-cam.com/video/KJ3DGCE-V2E/v-deo.html ua-cam.com/video/_sLL...
Subaru Crosstrek Rear Hatch Lift Support Replacement (2018-2022)
Переглядів 7163 місяці тому
Is the rear hatch on your Subaru Crosstrek not staying up? This video will show you how to replace the rear hatch lift supports on your 2018, 2019, 2020, 2021, or 2022 Subaru Crosstrek of any trim level. Sometimes called liftgate struts, these two rods keep the rear lift gate up when you want it up. If the lift gate slowly comes back down or just doesn't stay up the way it should, it's time for...
Subaru Crosstrek Front Strut Replacement (2018-2023 Models)
Переглядів 3,1 тис.5 місяців тому
This Subaru Crosstrek front strut replacement job is of moderate difficulty, but will vary greatly depending on the tools you have for the job. The instructions should be the same for the 2018 (as seen in this video), 2019, 2020, 2021, 2022, and 2023 model year Subaru Crosstreks. Here is the list of tools I used, or wished I used, along with some alternatives that may save you some money over t...
Where To Pour Coolant in a Car
Переглядів 1,3 тис.7 місяців тому
Have you ever wondered where to pour coolant when you need to add some? Well, if you're having trouble with your coolant / antifreeze, first you should be aware that it's not a fluid that should be lost over time; there is likely another issue like a leak, crack in the radiator, or even a head gasket issue that can be causing this, at least on modern vehicles. Video recap: 1: Only work on a coo...
Jeep Gladiator Review: What Makes a Great Pickup Truck?
Переглядів 6677 місяців тому
Jeep Gladiator Review: What Makes a Great Pickup Truck?
Replaced a Wheel Hub? Keep The Wheel Studs. Here's Why!
Переглядів 1,7 тис.8 місяців тому
Replaced a Wheel Hub? Keep The Wheel Studs. Here's Why!
Subaru Crosstrek Rear Strut Replacement
Переглядів 6 тис.9 місяців тому
Subaru Crosstrek Rear Strut Replacement
3D Printing Aftermarket Wheel Center Caps For The Crosstrek
Переглядів 1,4 тис.10 місяців тому
3D Printing Aftermarket Wheel Center Caps For The Crosstrek
Why Is This Engine-Destroying Oil Sold To The Public?
Переглядів 1 тис.10 місяців тому
Why Is This Engine-Destroying Oil Sold To The Public?
Best Wiper Blades: Brand Tier List
Переглядів 3,5 тис.11 місяців тому
Best Wiper Blades: Brand Tier List
DC Amp Clamps Versus Multimeters: Why Own Both?
Переглядів 1,8 тис.Рік тому
DC Amp Clamps Versus Multimeters: Why Own Both?
How To Use A Multimeter For Beginners: Easy Version!
Переглядів 5 тис.Рік тому
How To Use A Multimeter For Beginners: Easy Version!
Air Hose Fitting Installation: Thread Sealer VS Teflon Tape VS Pre-Applied
Переглядів 11 тис.Рік тому
Air Hose Fitting Installation: Thread Sealer VS Teflon Tape VS Pre-Applied
Jeep Gladiator Front Turn Signal (or DRL) Replacement
Переглядів 11 тис.Рік тому
Jeep Gladiator Front Turn Signal (or DRL) Replacement
4th Brake Light Installation Made Easy!
Переглядів 662Рік тому
4th Brake Light Installation Made Easy!
Subaru Crosstrek Water Pump Pulley Replacement (OEM or Perrin Lightweight Upgrade!)
Переглядів 1,3 тис.Рік тому
Subaru Crosstrek Water Pump Pulley Replacement (OEM or Perrin Lightweight Upgrade!)
4Runner Air Filter Replacement: Easiest Method!
Переглядів 6 тис.Рік тому
4Runner Air Filter Replacement: Easiest Method!
Solderstick Waterproof Solder Wire Connector: Pull Test & Thoughts!
Переглядів 824Рік тому
Solderstick Waterproof Solder Wire Connector: Pull Test & Thoughts!
Trying Out Something No Other Automotive Channels Do
Переглядів 372Рік тому
Trying Out Something No Other Automotive Channels Do
Ingersoll Rand Twin Stack Air Compressor Oil Change!
Переглядів 1,2 тис.Рік тому
Ingersoll Rand Twin Stack Air Compressor Oil Change!
The Difference Between Wheel Bearings & Wheel Hubs
Переглядів 49 тис.Рік тому
The Difference Between Wheel Bearings & Wheel Hubs
Jeep Key Fob Battery Replacement (Jeep Gladiator, Wrangler JL)
Переглядів 5 тис.Рік тому
Jeep Key Fob Battery Replacement (Jeep Gladiator, Wrangler JL)
Why You Want a Hunting Gear Ratio in Your Vehicle
Переглядів 5 тис.Рік тому
Why You Want a Hunting Gear Ratio in Your Vehicle
Don't Be THIS GUY!
Переглядів 990Рік тому
Don't Be THIS GUY!

КОМЕНТАРІ

  • @privatename8888
    @privatename8888 День тому

    Thanks, I went to a shop and they installed it arrows facing up and the blower is at the bottom. I even used the plastic wrapper the filter came in to determine flow. It sucked air in from the bottom. Can't even trust a shop and they also broke a piece off my glove box.

  • @AlbyPascual
    @AlbyPascual 2 дні тому

    cool !

  • @whitneyhayes3225
    @whitneyhayes3225 2 дні тому

    Thanks but what about under the seats, carpet and overhead material?

  • @missally8933
    @missally8933 2 дні тому

    Thank you for this video. Please make more. You could call them Engines 101.

  • @kayakMike1000
    @kayakMike1000 3 дні тому

    Hunting planetary gears.. hmmm....

  • @kayakMike1000
    @kayakMike1000 3 дні тому

    Prime number gear teeth. Very important in helicopters also.

  • @totoroboto
    @totoroboto 4 дні тому

    There's no way I could see if the fan is above or below where the filter space is so after removing the filter, I turned on my cell phone to record video and stuck it into the space. Now I can clearly see the fan is below the filter. Hope this method is useful to someone else!

  • @davidk912
    @davidk912 4 дні тому

    Very helpful. Thanks for taking time to post this.

  • @PaulbylPaulbyl
    @PaulbylPaulbyl 4 дні тому

    I am trying to figure out, from an engineering perspective, how the indirect sensor works? Here's my theory. If tire pressure is low, the tire will have to rotate faster to complete a full revolution for any given speed (because the radius, and consequently the circumferential travel, of the tire is smaller).

  • @samred007
    @samred007 5 днів тому

    Talks about spin-on oil filters, shows a canister-type oil filter. Make up your mind.

    • @CarsSimplified
      @CarsSimplified 5 днів тому

      I definitely would have preferred to have had the footage of the inside of a spin-on ready to go, but I made up my mind that the core of a different type of filter (that was already recorded) conveyed the idea of a metal core well enough for a few seconds of footage.

  • @averagejoe5143
    @averagejoe5143 5 днів тому

    Go back to spin on, do away with this garbage.

  • @metalsurgeon9196
    @metalsurgeon9196 5 днів тому

    Shouldnt matter. Dont buy shit filters. Champ is not a brand I trust have seen too many burst.

    • @jhon44mat
      @jhon44mat 5 днів тому

      Champion makes OEM filters for Ford, Mopar, and autozone’s house brand STP. I trust Mann/ Wix. They’re better made. Along with MAHLE too

    • @metalsurgeon9196
      @metalsurgeon9196 5 днів тому

      @@jhon44mat use mahle gaskets, don't have a supplier for their filters. I use anything made in Gastonia by wix, mann and Hummel, or microgard(wix house brand for O'Reilly's)

    • @u_s_e_rname
      @u_s_e_rname 5 днів тому

      @@jhon44matbetter made than what?

    • @metalsurgeon9196
      @metalsurgeon9196 5 днів тому

      @@u_s_e_rname .....than champ....what did you miss I think it's pretty obvious what brand we are talking about.

    • @CarsSimplified
      @CarsSimplified 5 днів тому

      Yeah, the Champ filter I got was... Concerningly inexpensive. The walls don't feel particularly thin (I've encountered quick lube store brand filters that are definitely thinner) but it is likely going to exist just as a prop in the future.

  • @israrshaik6549
    @israrshaik6549 5 днів тому

    Thanks!

  • @israrshaik6549
    @israrshaik6549 5 днів тому

    Great video with clear instructions. Saved a trip to auto shop

  • @xiiza6268
    @xiiza6268 7 днів тому

    Thanks dude, I didn't understand the LED indicator circuit fully until you mentioned that the resistor added in parallel helps draw more current THROUGH the flasher unit

  • @soldiersvejk2053
    @soldiersvejk2053 7 днів тому

    Great video. Thanks!

  • @edlopez5k
    @edlopez5k 7 днів тому

    Thank you, sir!!

  • @loligagger85
    @loligagger85 7 днів тому

    the radiator cap does NOT let coolant back in when its cool but as it cooled down it lets it in but NOT when its cold.

  • @loligagger85
    @loligagger85 7 днів тому

    All over flow tanks are expansion tanks, but not all expansion tanks are over flow tanks.

  • @JohnBaker3000
    @JohnBaker3000 9 днів тому

    Nice! Thank-you. Bulb type is 168. Sylvania 168 LL for Long Life or 168 ST for Silver Star

  • @phenomphantom5329
    @phenomphantom5329 10 днів тому

    Mr cars simplified I got these connectors for my spec d tuning headlights not sure how to connect them 😭and the tutorials are confusing for a wrx 2004

  • @zwmm
    @zwmm 10 днів тому

    Short and to the point, well done. Bonus for the outtake.

  • @dquam3885
    @dquam3885 10 днів тому

    Please explain the performance difference between J case, M case, and PAL fuses.

  • @user-sb5jo4fe1c
    @user-sb5jo4fe1c 11 днів тому

    Simply the best true knowledge about car batteries I ever come across in all my driving since 1980 even before the internet and I don't give complements often! I say this because I have never had less than 9 years life from a car battery, mostly 10-11 years and once 12+ years. Back in the 80s you would have to unscrew the caps of each cell and top-up with pure water then a charge, even today I always charge before winter and again at beginning of summer. My current battery is 10 and a half yrs.of age but now becoming sluggish starting sometimes. When I would mention to anyone I get 10 years I felt they thought I was at best exaggerating or lying. Even now looking up car battery life, 99% say 3-5 years 7-8 if very lucky, some of these posted by motoring organizations and workshops. Half the time I think they're confusing maker's warrantee with life expectancy. Thanks for the opportunity to have my rant. Keep up the sound advice.

  • @chillgrizz28
    @chillgrizz28 11 днів тому

    this is completely retarded

  • @mikem5475
    @mikem5475 12 днів тому

    You need t pins to work on cars. They're nearly free

  • @B00merBob
    @B00merBob 12 днів тому

    I have a 2019 Mitsubishi Outlander Sport (SUV) so wasn't looking for a performance enhancer. On a bumpy road it feels like it's jumping all over the place. Shocks and springs are good so I wasn't sure if one would help in my situation. I went ahead and bought a Megan Racing front strut bar and it fixed the issue by 90%!

  • @PeeterPuncher
    @PeeterPuncher 12 днів тому

    The auto companies don't care about how long your engine lasts, the thin oil is ONLY for reduced drag and the insignificant increase in fuel economy.

  • @dannychenhoykong3412
    @dannychenhoykong3412 13 днів тому

    如果我没有把head拆下来,像这样拆弹簧换seal,valve会掉下去吗? 有方法不让valve掉下去吗?

  • @user-ti4hb7yi3v
    @user-ti4hb7yi3v 13 днів тому

    Thanks for simplifying the process!

  • @goronspice5197
    @goronspice5197 13 днів тому

    Really good vid, thanks

  • @AGreedyTree
    @AGreedyTree 13 днів тому

    I used these to fix the wires on my lawn mower. They worked great. I wouldn't have had enough room to solder and heat shrink without taking the top of the engine apart.

  • @windinthewillow1871
    @windinthewillow1871 14 днів тому

    Dude that was the best video I've ever seen.

  • @tophermanuel184
    @tophermanuel184 14 днів тому

    Question, is a 08 infinity fx 35 AWD, a interference or a non interference engine?

  • @MrUnderEstimated
    @MrUnderEstimated 14 днів тому

    this may be a dumb question but.... what will happen if the bulb and the switch switched places and there was a ground in between the bulb and the fuse?

  • @runningbaum9430
    @runningbaum9430 14 днів тому

    What is the voltage drop between your two resistors. In other words place your first lead after the first resistor and your second lead before the second resistor. If you measure 12 Volts, your lesson is incomplete and you have left your students with more questions then answers. You need to update this video.

  • @meengla
    @meengla 15 днів тому

    This really helped me--didn't even pay attention to the blower right below the place where I had wrongly put the filter. Thanks!

  • @howardwhite8397
    @howardwhite8397 15 днів тому

    Great video! Thanks!

  • @madetoremain
    @madetoremain 15 днів тому

    HI - i have Chevrolet epica 2009 with 2.4 6 cylinders engine - i remove the old engine and install new Toyota Camry engine every thing is great but i want to know Do i have to change the RAD system from the original one ( expansion tank ) to Over flow type ? Thanks

  • @madetoremain
    @madetoremain 15 днів тому

    HI - i have Chevrolet epica 2009 with 2.4 6 cylinders engine - i remove the old engine and install new Toyota Camry engine every thing is great but i want to know Do i have to change the RAD system from the original one ( expansion tank ) to Over flow type ? Thanks

  • @monicapayne3681
    @monicapayne3681 16 днів тому

    Oh my goodness. This is a great video, but it's not working! I've been struggling for an hour!!! Does something this small need to be so difficult???

  • @JoseGuzman-uu6ho
    @JoseGuzman-uu6ho 17 днів тому

    🎉thank you for your support the video was amazing. Thank you again.

  • @JR-ss3td
    @JR-ss3td 17 днів тому

    I accidentally put dot 4 in a dot 5 system. Now the brakes are grabbing a little bit. I'm Going to flush it. Do you think there may be any long term damage from doing this?

  • @tommysdirtandsoultommytheh1569
    @tommysdirtandsoultommytheh1569 17 днів тому

    I guess I'm the real old school oddball here. Cabin air filters are my pet peeve. Like I said I'm old school and can't stomach all the new car features. I long for cassette players! Just kidding although I do miss the CD player and hate that my car doesn't have one. I also shut off all the warning bells and automatic braking, lane adjustments and all that. But cabin air filters! I had a car with 165,000 miles on it and never changed the filter. The dealership used to say they couldn't get it out that it was like a nest in there. I eventually started putting a note on my glove box saying "Do Not Open." I got sick of hearing "I need a new cabin air filter." Never changed them in any of my vehicles. Never had a problem.

  • @jenjenny79
    @jenjenny79 17 днів тому

    You made this seem so easy. Thank you!

  • @r3dhorse
    @r3dhorse 18 днів тому

    Could just use quick struts.

  • @RokerSMisisipi
    @RokerSMisisipi 18 днів тому

    The fuse box in my car is extremely dusty, like you can barely read anything on it. Should I try to clean it and how?

  • @trollslayer8260
    @trollslayer8260 19 днів тому

    I used a 4 guage ac wire from lowes to run a car audio system before, it worked ok on my mids and highs amp but it sucked on the sub amp . It wouldnt supply enough current for some reason, even though it would hold the voltage just fine . I never used it again after that but i always wondered why it wouldnt . It wasnt solid wire , but the strands were thicker than car audio wire. They were also stiff. It was weird , i could hook up a single 4 ohm subwoofer to it and it would work fine. When i hooked up my dual two ohm subwoofer to it ,it would barely play. It was rated to put out 1200 watts at 1 ohm, and i checked my grounds and power with a dmm. Never understood it, other than it being an issue with being able to supply amperage at a low voltage or maybe a resistance thing. I have known several people get the same results when using it. I guess thats why people dont use it in car audio lol.

  • @67judge
    @67judge 19 днів тому

    Did you upgrade your Strut Bar on the GTO? I did mines with a BMR version 😅

    • @CarsSimplified
      @CarsSimplified 19 днів тому

      I have not, but after putting one on the Crosstrek, I want to get one for the GTO. I think I was looking at a BMR branded one as well.

  • @dannydee9919
    @dannydee9919 20 днів тому

    I've broken 3 replay in the past 3 days. Yes they are necessary